- A few drops of oil in the bottom of the bowl
- Oil dripping off the beater shaft
- Oil leaking out of the lock lever or Speed Control slots on a mixer that has been turned on its side during shipping or storage
Why is oil dripping from my KitchenAid mixer?
This can happen for a few reasons, according to KitchenAid. You don’t use your mixer enough. You live in a very warm climate. Your mixer was stored on its side during shipping or storage, which can cause oil to leak out of the lock lever or around the speed controls.
What is the life expectancy of a KitchenAid stand mixer?
Whirlpool, the company that owns the KitchenAid brand, suggests that the average KitchenAid mixer lifespan is about 10-15 years.
Do KitchenAid stand mixers need to be oiled?
Yes. KitchenAid mixers should be serviced regularly to keep them running properly. This may include lubricating moving parts, replacing worn parts, and cleaning the mixer.
Is there a lifetime warranty on KitchenAid mixers?
Length of Warranty: One Year Full Warranty from date of purchase. KitchenAid Will Pay for Your Choice of: Hassle-Free Replacement of your Stand Mixer. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390.
Can I trade in my old KitchenAid mixer?
You can trade in any brand stand mixer, stand blender, or food processor and receive credit towards a NEW or refurbished KitchenAid stand mixer, stand blender, or food Processor!
What kind of oil does a KitchenAid mixer use?
Grade grease lubricant: Your KitchenAid mixer uses food-grade grease lubricant.
How often should you clean your stand mixer?
Your mixer will benefit from a deep cleaning two or three times a year. Especially when it’s getting maximum use during holiday cookie season! Use a dry toothbrush or specialty kitchen brush to clean debris around knobs on the mixer head. Once the dirt has been brushed away, use a damp cloth to wipe around the knobs.
Is KitchenAid a high end brand?
KitchenAid may have started with small appliances, but today, the brand counts on a premium line of kitchen appliances worthy of being called luxury. But just because KitchenAid is high-end doesn’t mean you have to pay full price to enjoy a kitchen full of its products.
When using a stand mixer What should you never do?
- Switching Speeds Too Quickly.
- Not Lowering the Speed When Incorporating Dry Ingredients.
- Baking in Too Large of Quantities.
- Not Cleaning Every Part of Your Stand Mixer.
How often do you change the grease in a KitchenAid mixer?
KitchenAid recommends you change your grease once a year! This is relevant to how often you use your machine. For those who have oil leaking from the Planetary Ring (the chrome ring) then you need to change your grease.
Why is my oil leaking from the bottom?
Common causes of oil leaks include degraded engine gaskets, leaks from the oil pan, or improper or worn out seals. An oil leak also can be caused by a loose or missing oil pan drain plug or deteriorated valve cover gaskets.
Why is my oil leaking all of a sudden?
Most commonly, this happens when the oil pan gasket or valve cover gasket are over-tightened. It can also happen when tightness is not evenly distributed. Another reason can be the improper attachment of the oil filter, as the engine oil flows continuously through it, and if it’s loose, you can experience a leak there.
Why do I keep getting oil leaks?
Car oil or engine oil leaks occur when the oil filter loosens over time or if the oil gasket isn’t tightened properly. These are also known as oil filter leaks, and most of the time, tightening the filter gasket should do the trick, according to the specifications of the manufacturer.
Can you service a KitchenAid mixer?
If you wish to repair your mixer yourself, you can contact an authorized service facility, as they offer repair and also sell internal parts. Please note that your warranty will not cover any damage or problems that may arise from self-repair.
Are KitchenAid appliances worth the extra money?
KitchenAid appliances are a great option for shoppers looking to stretch a dollar with a reliable appliance that looks great, too. After taking into consideration all the fantastic features the brand has to offer, these are our favorite picks for both refrigerators and dishwashers.
How much should I spend on a stand mixer?
Stand mixers can be found for anywhere from about $100 to over $400. If you are into baking and plan on using your mixer for bread, do not even think about getting a lower-priced, lower-powered model. It is worth it to buy the heaviest, most powerful model that you can afford.
Can I store KitchenAid mixer on its side?
Storing your mixer improperly: When stashed too low or too high, you’re at a greater risk of dropping the mixer or injuring yourself. You also want to make sure the mixer is stored upright and not on its side.
Why is my KitchenAid mixer making a grinding noise?
If the mixer is making a loud grinding noise, the worm gear within the mixer may be causing it. The worm gear is a plastic gear that is designed to fail if something goes wrong inside the mixer, so that the motor doesn’t burn out.
Can KitchenAid stand mixer overheat?
If you notice that your stand mixer has shut down all of a sudden, it’s because it has overheated. Some KitchenAid stand mixer models have a Thermal Overload Protection switch which will turn the mixer off automatically when it starts to overheat.
How can I tell how old my KitchenAid mixer is?
KitchenAid Serial Number: The KitchenAid mixer serial number is a 9 digit number that tells you where your mixer was manufactured and when. The first 4 numbers indicate the factory it was made in and the date.
Can I use Kohl’s Cash for KitchenAid mixer?
This product is not eligible for coupons. However, you are able to earn and redeem Kohl’s Cash and Kohl’s Rewards on this product.
What is special about KitchenAid?
However, did you know that a KitchenAid stand mixer can also grind meat, shred chicken, slice, dice, and spiralize vegetables. Thanks to a wide range of accessories and attachments combined with a powerful, high-speed motor, a KitchenAid stand mixer is one of the most versatile additions you can make to your kitchen.
How many quarts is my KitchenAid stand mixer?
The KitchenAid Artisan Series stand mixers offer over 20 color options and includes a 5 qt stainless steel bowl with a comfortable handle, along with a pouring shield.
What is the best way to clean a KitchenAid stand mixer?
Cleaning Your Mixer: Coated and stainless steel tools and pouring shield can go in the top rack of dishwasher. The bowl can go in the top or bottom rack. Wire whip and uncoated tools should be washed by hand only. Alternatively, the bowl and tools can be hand-washed in hot, soapy water.
How do you deep clean a KitchenAid mixer?
- Unplug the appliance.
- Hand-wash attachments.
- Clean mixing bowl.
- Remove spills, splatters, and food residue.
- Clean tough areas with baking soda.
- Wipe inside attachment hub.
- Get under the motor head.
- Clean the beater shaft thoroughly.
Is the bowl supposed to spin on stand mixer?
On the stand mixers all turntables are free-wheeling and must be turned by hand. The bowl spins on a freely spinning base by the nylon tip of the cone shape beater. The bowl may need to be nudged with your hand to encourage it to spin.
Are KitchenAid and JennAir the same?
No, KitchenAid and JennAir are not the same company. However, both appliance brands are owned by the Whirlpool Corporation. Is JennAir high-end? JennAir is considered a high-end brand.
Are KitchenAid mixers worth it?
Of course, it all depends on your budget and your zeal for cooking and baking. But if you are regularly whipping up bread, cookies, or anything else that needs a lot of beating, mixing, and whisking, a KitchenAid will make your life way easier—the word aid is in the name, so let yourself be helped, for god’s sake.
What is the screw on the side of the KitchenAid mixer for?
It sets those tools at the perfect height, whether you have an Artisan mixer or one of the many bowl-lift models. Turning the screw to the left will raise the whisk and paddle, and twisting to the right will lower them, giving you the best performance possible.