Why is my Whirlpool refrigerator freezer cold but refrigerator is warm?
When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. This motor powers the fan that blows cold air over the refrigerator coils. Without this fan refrigerant won’t cool enough to maintain the refrigerator’s temperature.
Why is my Whirlpool fridge and freezer not getting cold?
There are several causes for a refrigerator that doesn’t cool, including dirty condenser coils, poor ventilation, improper installation, faulty or dirty gasket seals, unorganized food storage, appliance location and malfunctioning internal parts.
What to do if freezer is cold but refrigerator is warm?
If your freezer is cold but refrigerator is warm, one of the first things you should check is the thermostat. It might be set to “off” by accident, or it could be turned down too low. To fix it: Set it to the correct setting and see if that fixes the problem. We’d recommend 37 degrees Fahrenheit.
How do I reset my Whirlpool fridge or freezer?
Power unit down by turning off the circuit breaker or unpluging the product for 5 – 10 minutes.
Power unit up by turning on the circuit breaker or plugging the product back in.
Ensure the cooling function is turned on.
Test the control panel functionality.
Why won’t my refrigerator get cold but my freezer works?
Condenser Coils Need Cleaning: Dirty condenser coils are another common reason why your refrigerator won’t get cold but the freezer will. The condenser coils are responsible for removing heat from the air inside your refrigerator. If they are covered in dust or debris, they won’t be able to expel heat properly.
How do I fix my Whirlpool refrigerator not cooling?
Check the temperature control setting.
Check the power supply.
Look for blockages in the airflow vents.
Inspect the evaporator coils.
Reset the motherboard.
Make sure the door seals are tight.
Clean the condenser coils.
Check the condenser fan motor.
How long do I unplug my fridge to reset it?
Usually I would unplug it for about 5 minutes. This lets the refrigerant pressures in the system to equalize. It should also give the electronics time to reset.
Can frost in freezer cause fridge to not cool?
Replace the Refrigerator Evaporator Fan: If you can hear the compressor running but the fridge isn’t cooling, the problem is most likely either frost-clogged evaporator coils or a stuck or broken evaporator fan.
Why is my fridge going warm and cold?
The Control Board is Acting Up: Your fridge’s control board communicates with heat sensors to control the internal temperature. If the control board isn’t working correctly, it may not adjust the temperature appropriately to keep your fridge cool enough to store food safely.
How do I reset my refrigerator control board?
Try resetting the control panel by turning off power to the refrigerator briefly. Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control.
Turn the dial counter-clockwise one click left, clockwise three clicks, counterclockwise one click, and then clockwise one click.
Why is my Whirlpool refrigerator warm?
Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.
Why is my fridge and freezer not blowing cold air?
Refrigerators require proper airflow in order to cool properly. If your refrigerator isn’t cooling, it may be because food items are blocking the vents of the fridge and/or freezer compartments. Overstuffing your fridge with food can cause items to block the vents and prevent the cool air from circulating properly.
What are some of the problems with Whirlpool refrigerators?
The condenser coils are dirty.
The condenser fan motor is out.
The evaporator fan motor is out.
The thermostat isn’t working.
The temperature control board is down.
The start capacitor is bad.
The start relay is defective.
The compressor itself is faulty.
Should I unplug refrigerator if not cooling?
If your fridge is not cooling but the light is on, your freezer may have an icy build-up. Unplugging your refrigerator may be a good troubleshooting move. The ice may be blocking a vent in the freezer that’s preventing your refrigerator portion from properly cooling.
What should you do if your refrigerator is warm?
Remove anything blocking the circulation vents.
Keep enough food in your fridge.
Check for an old or cracked gasket seal.
Clean the condenser coils.
Inspect the evaporator fan motor for clogs or damage.
Ensure the condenser fan motor hasn’t stopped.
Will freezer work if compressor is bad?
If you’re experiencing problems with your refrigerator, one of the most common causes is a bad compressor. The compressor is one of the main components of a refrigerator, so if it fails the fridge won’t function as it should and your food will spoil.
How do I know if my fridge temperature sensor is bad?
If you suddenly notice your food isn’t that cool as you expected it to be or the drinks smell bad, then it’s a major indication that the thermostat of your refrigerator has gone for a toss.
How much does it cost to replace a refrigerator control board?
The control board is one of the most expensive refrigerator parts to fix, at between $80 and $800, because no part of the appliance can function without it. If your fridge has completely stopped working, it probably has something to do with your control board. The higher-end the brand, the more you can expect to pay.
What does resetting a refrigerator do?
Resetting your refrigerator compressor is a useful option for anyone looking to defrost their machine or adjust its temperature. A reset can also sometimes resolve other internal issues, like malfunctioning timer cycles, so it’s one of the first things you should try if your refrigerator seems to be having issues.
How do I reset my Whirlpool without unplugging it?
Follow these steps to reset a Whirlpool washing machine: Make sure the power to the washer is turned on at the wall, but keep the Power button on the control off. Hold the Program button down while simultaneously pressing the Water Level button two times. When done correctly, the control panel lights should illuminate.
How do I reset my Whirlpool control panel?
Some models require you to shut off the power to the dishwasher either by unplugging it or shutting off the circuit breaker. Others are reset by pressing and holding the Start/Reset button on the control panel, then waiting a few moments before attempting to start a wash cycle.
What is the lockout button for on a Whirlpool refrigerator?
It simply deactivates the dispenser controls and pad.
How do you put a refrigerator in diagnostic mode?
Start by holding down the Freezer Temperature Up button and the Freezer Temperature Down button at the same time. Now you will need to release the buttons and depress them both at the same time twice more. You only have a five-second period in which you can do this, so you need to move quickly and with precision.
How much does it cost to diagnose a refrigerator?
When you call an appliance repair specialist to come out to your home, they will typically charge a fee just to diagnose your problem. This fee could be anywhere from $50 to $150.
What is the most common fridge failure?
The most common refrigerator problem is a refrigerator not cooling. Obviously, having your fridge keep food cool is a necessity, so this issue needs to be addressed quickly.
Is there a class action lawsuit against Whirlpool refrigerators?
Whirlpool refrigerator settlement benefits. Class Members can collect up to $150 in compensation under the Whirlpool refrigerator settlement terms. The amount each Class Member will be reimbursed for depends on when the repairs were made. More information can be found in the “Potential Award” section below.
What brand of refrigerator has the least problems?
Top-freezers, as a category, have the highest predicted reliability. Despite these high marks, most top-freezer brands were rated low in terms of owner satisfaction. Within the category, five of the nine brands earned top-notch ratings for predicted reliability: Kenmore, LG, Maytag, Samsung, and Whirlpool.
Why is my Whirlpool freezer working but my fridge is not cooling?
When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. This motor powers the fan that blows cold air over the refrigerator coils. Without this fan refrigerant won’t cool enough to maintain the refrigerator’s temperature.
